Mass Volume and Flow
Source: https://emi.qcc.gov.ae/EMI-Laboratories/Mass-Volume-and-Flow-Laboratory
Archived: 2026-04-23 17:14
Mass Volume and Flow
Mass
The unit of mass is realized through an ensemble of three stainless steel primary 1 kg mass standards. Traceability to the international prototype kilogram (IPK) is provided directly through BIPM in France. The traceability of sub-multiples and multiples of the kilogram in the range 1 mg – 500 kg is ensured through calibration by implementing appropriate weighing designs. Calibrations of mass standards in terms of conventional and true mass, and of electronic balances are offered as follows:
Artifact/Instrument
Range
Calibration and Measurement Capability (CMC)
Mass Standards
1 mg…500g
0.0010 mg…0.0025 mg
1 g...50g
0.0030 mg…0.010 mg
100 g…10 kg
0.016 mg…1.6 mg
20 kg...500kg
10 mg...80 mg
100 kg...500 kg
0.25 g...4.9 g
Electronic Balances
200 mg..5 kg
0.010 mg...3.8 mg
10 kg...170 kg
25 mg...740 mg
Solid and Liquid Density
Density of solids and liquids is determined by hydrostatic weighing. In the former the density of the working liquid is determined through a 1 kg Si sphere whilst for the latter a glass density artefact is used. Traceability to the S.I. is through PTB in Germany.
Artifact/Liquid
Range
(CMC)
Solid Density Standard at 20°C
Mass: 20 g to 1 kg
2330 kg/m
3
…2800 kg/m
3
1 kg/m
3
Mass Standards at 20°C
7900 kg/m
3
…8400 kg/m
3
Mass: 1g…1kg
60 kg/m
3
…1.5 kg/m
3
Density of Liquid at 20°C
680 kg/m
3
…1200 kg/m
3
0.86 kg/m
3
…1.3 kg/m
3
Liquid Flow
Liquid Flow is realized through a primary volumetric standard (piston prover) and through the master meter method for on-site calibrations. The calibration liquid used is typically filtered tap water calibrations of liquid flow meters (turbine, Coriolis, e-mag, etc..) with sizes between 3/8”…2” are carried out at ambient conditions as follows:
Calibration Field/Measured Quantity
Range
(CMC)
Electromagnetic Flow Meters
Turbine Meters
Coriolis Meters
Positive Displacement
36 l/h…66,000 l/h
0.12%
50 l/h…100,000 l/h
0.12%
Gas Flow
Gas Flow is realized through primary volumetric reference devices of the piston and bell prover type, operating with clean, dry air at ambient conditions. Calibrations of gas volumetric flow and totalizing meters (turbine, variable area, etc..) with sizes between 1/4”…1” are carried out in the following ranges:
Calibration Field/Measured Quantity
Range
(CMC)
Rotameters
Mass Flow Controllers
Thermal Mass Flowmeters
0.3 l/h…3,000 l/h
0.2%
Primary Flow Meters*
Turbine Meters*
Diaphragm Meters*
Wet Gas Meters*
900 l/h…72,000 l/h
0.2%
Volume
Piston Operated Volumetric Instruments, Volumetric Glassware and Metallic Prover Vessels are calibrated by employing gravimetric and volumetric methods. Measurement traceability is ensured through the UAE national standards of mass, density and temperature (EMI). Volume calibrations are offered as follows:
Calibration Field/Measured Quantity
Range
(CMC)
Piston Operated Micro-Pipettes
10 μl …10 ml
0.024…17 μl
Volumetric Glassware
10 ml…2,000 ml
0.023…2.5 ml
Prover vessels
5 l…100 l
0.1% (gravimetrically)
Prover vessels
5 l…2,000 l
0.3% (volumetrically)
X
Cookies help us improve your website experience.By using our website, you agree to our use of cookies.
Confirm
Mass
The unit of mass is realized through an ensemble of three stainless steel primary 1 kg mass standards. Traceability to the international prototype kilogram (IPK) is provided directly through BIPM in France. The traceability of sub-multiples and multiples of the kilogram in the range 1 mg – 500 kg is ensured through calibration by implementing appropriate weighing designs. Calibrations of mass standards in terms of conventional and true mass, and of electronic balances are offered as follows:
Artifact/Instrument
Range
Calibration and Measurement Capability (CMC)
Mass Standards
1 mg…500g
0.0010 mg…0.0025 mg
1 g...50g
0.0030 mg…0.010 mg
100 g…10 kg
0.016 mg…1.6 mg
20 kg...500kg
10 mg...80 mg
100 kg...500 kg
0.25 g...4.9 g
Electronic Balances
200 mg..5 kg
0.010 mg...3.8 mg
10 kg...170 kg
25 mg...740 mg
Solid and Liquid Density
Density of solids and liquids is determined by hydrostatic weighing. In the former the density of the working liquid is determined through a 1 kg Si sphere whilst for the latter a glass density artefact is used. Traceability to the S.I. is through PTB in Germany.
Artifact/Liquid
Range
(CMC)
Solid Density Standard at 20°C
Mass: 20 g to 1 kg
2330 kg/m
3
…2800 kg/m
3
1 kg/m
3
Mass Standards at 20°C
7900 kg/m
3
…8400 kg/m
3
Mass: 1g…1kg
60 kg/m
3
…1.5 kg/m
3
Density of Liquid at 20°C
680 kg/m
3
…1200 kg/m
3
0.86 kg/m
3
…1.3 kg/m
3
Liquid Flow
Liquid Flow is realized through a primary volumetric standard (piston prover) and through the master meter method for on-site calibrations. The calibration liquid used is typically filtered tap water calibrations of liquid flow meters (turbine, Coriolis, e-mag, etc..) with sizes between 3/8”…2” are carried out at ambient conditions as follows:
Calibration Field/Measured Quantity
Range
(CMC)
Electromagnetic Flow Meters
Turbine Meters
Coriolis Meters
Positive Displacement
36 l/h…66,000 l/h
0.12%
50 l/h…100,000 l/h
0.12%
Gas Flow
Gas Flow is realized through primary volumetric reference devices of the piston and bell prover type, operating with clean, dry air at ambient conditions. Calibrations of gas volumetric flow and totalizing meters (turbine, variable area, etc..) with sizes between 1/4”…1” are carried out in the following ranges:
Calibration Field/Measured Quantity
Range
(CMC)
Rotameters
Mass Flow Controllers
Thermal Mass Flowmeters
0.3 l/h…3,000 l/h
0.2%
Primary Flow Meters*
Turbine Meters*
Diaphragm Meters*
Wet Gas Meters*
900 l/h…72,000 l/h
0.2%
Volume
Piston Operated Volumetric Instruments, Volumetric Glassware and Metallic Prover Vessels are calibrated by employing gravimetric and volumetric methods. Measurement traceability is ensured through the UAE national standards of mass, density and temperature (EMI). Volume calibrations are offered as follows:
Calibration Field/Measured Quantity
Range
(CMC)
Piston Operated Micro-Pipettes
10 μl …10 ml
0.024…17 μl
Volumetric Glassware
10 ml…2,000 ml
0.023…2.5 ml
Prover vessels
5 l…100 l
0.1% (gravimetrically)
Prover vessels
5 l…2,000 l
0.3% (volumetrically)
X
Cookies help us improve your website experience.By using our website, you agree to our use of cookies.
Confirm