eCFR :: 36 CFR 1192.83 -- Mobility aid accessibility.
Site Feedback
You are using an unsupported browser
You are using an unsupported browser. This web site is designed for the current versions of
Microsoft Edge, Google Chrome, Mozilla Firefox, or Safari.
Site Feedback
The Office of the Federal Register publishes documents on behalf of Federal agencies but does not have any authority over their programs. We recommend you directly contact the agency associated with the content in question.
If you have comments or suggestions on how to improve the www.ecfr.gov website or have questions about using www.ecfr.gov, please choose the 'Website Feedback' button below.
Website Feedback
If you would like to comment on the current content, please use the 'Content Feedback' button below for instructions on contacting the issuing agency
Content Feedback
If you have questions for the Agency that issued the current document please contact the agency directly.
Website Feedback
Browse
Titles
Agencies
Incorporation by Reference
Recent Updates
Recent Changes
Corrections
Reader Aids
Reader Aids Home
Using the eCFR Point-in-Time System
Understanding the eCFR
Government Policy and OFR Procedures
Developer Resources
Recent Site Updates
My eCFR
My Subscriptions
Sign In / Sign Up
eCFR
The Electronic Code of Federal Regulations
Enhanced Content :: FR Reference
Enhanced content is provided to the user to provide additional context.
Enhanced Content :: FR Reference
Title 36
This content is from the eCFR and is authoritative but unofficial.
Displaying title 36, up to date as of 4/22/2026. Title 36 was last amended 4/02/2026.
view historical versions
drafting site is available
for use when drafting amendatory language
switch to drafting site
Navigate by entering citations or phrases
(eg:
1 CFR 1.1
49 CFR 172.101
Organization and Purpose
1/1.1
Regulation Y
FAR
).
Choosing an item from
citations and headings
will bring you directly to the content. Choosing an item from
full text search results
will bring you to those results. Pressing enter in the search box
will also bring you to search results.
Background and more details are available in the
Search & Navigation
guide.
Title 36
—Parks, Forests, and Public Property
Chapter XI
—Architectural and Transportation Barriers Compliance Board
Part 1192
—Americans with Disabilities Act (ADA) Accessibility Guidelines for Transportation Vehicles
Subpart D
—Light Rail Vehicles and Systems
§ 1192.83
Previous
Next
Top
Table of Contents
Enhanced Content - Table of Contents
The in-page Table of Contents is available only when multiple sections are being viewed.
Use the navigation links in the gray bar above to view the table of contents that this content belongs to.
Enhanced Content - Table of Contents
Details
Enhanced Content - Details
URL
Citation
36 CFR 1192.83
Agency
Architectural and Transportation Barriers Compliance Board
Part 1192
Authority:
29 U.S.C. 792
(b) (3);
42 U.S.C. 12204
Source:
56 FR 45558
, Sept. 6, 1991, unless otherwise noted.
Enhanced Content - Details
Print/PDF
Enhanced Content - Print
Generate PDF
This content is from the eCFR and may include recent changes applied to the CFR.
The official, published CFR, is updated annually and available below under
"Published Edition". You can learn more about the process
here
Enhanced Content - Print
Display Options
Enhanced Content - Display Options
Enhanced Content - Display Options
Enhanced Content - Subscribe
Subscribe to:
36 CFR 1192.83
Enhanced Content - Subscribe
Timeline
Enhanced Content - Timeline
Enhanced Content - Timeline
Go to Date
Enhanced Content - Go to Date
Enhanced Content - Go to Date
Compare Dates
Enhanced Content - Compare Dates
Enhanced Content - Compare Dates
Published Edition
Enhanced Content - Published Edition
View the most recent official publication:
View Title 36 on govinfo.gov
View the PDF for 36 CFR 1192.83
These links go to the official, published CFR, which is updated annually. As a
result, it may not include the most recent changes applied to the CFR.
Enhanced Content - Published Edition
Developer Tools
Enhanced Content - Developer Tools
Information and documentation can be found in our
developer resources
Enhanced Content - Developer Tools
eCFR Content
The
Code of Federal Regulations
(CFR) is the official legal print publication containing the codification of the general and permanent rules published in the
Federal Register
by the departments and agencies of the Federal Government. The Electronic Code of Federal Regulations (eCFR) is a continuously updated online version of the CFR. It is not an official legal edition of the CFR.
about the eCFR, its status, and the editorial process.
§ 1192.83 Mobility aid accessibility.
General.
All new light rail vehicles, other than level entry vehicles, covered by this subpart shall provide a level-change mechanism or boarding device (e.g., lift, ramp or bridge plate) complying with either
paragraph (b)
or
(c)
of this section and sufficient clearances to permit at least two wheelchair or mobility aid users to reach areas, each with a minimum clear floor space of 48 inches by 30 inches, which do not unduly restrict passenger flow. Space to accommodate wheelchairs and mobility aids may be provided within the normal area used by standees and designation of specific spaces is not required.
Exception.
If lifts, ramps or bridge plates meeting the requirements of this section are provided on station platforms or other stops, or mini-high platforms complying with
§ 1192.73(d)
are provided, at stations or stops required to be accessible by
49 CFR part 37
, the vehicle is not required to be equipped with a car-borne device. Where each new vehicle is compatible with a single platform-mounted access system or device, additional systems or devices are not required for each vehicle provided that the single device could be used to provide access to each new vehicle if passengers using wheelchairs or mobility aids could not be accommodated on a single vehicle.
Vehicle lift
Design load.
The design load of the lift shall be at least 600 pounds. Working parts, such as cables, pulleys, and shafts, which can be expected to wear, and upon which the lift depends for support of the load, shall have a safety factor of at least six, based on the ultimate strength of the material. Nonworking parts, such as platform, frame, and attachment hardware which would not be expected to wear, shall have a safety factor of at least three, based on the ultimate strength of the material.
Controls
Requirements.
The controls shall be interlocked with the vehicle brakes, propulsion system, or door, or shall provide other appropriate mechanisms or systems, to ensure that the vehicle cannot be moved when the lift is not stowed and so the lift cannot be deployed unless the interlocks or systems are engaged. The lift shall deploy to all levels (i.e., ground, curb, and intermediate positions) normally encountered in the operating environment. Where provided, each control for deploying, lowering, raising, and stowing the lift and lowering the roll-off barrier shall be of a momentary contact type requiring continuous manual pressure by the operator and shall not allow improper lift sequencing when the lift platform is occupied. The controls shall allow reversal of the lift operation sequence, such as raising or lowering a platform that is part way down, without allowing an occupied platform to fold or retract into the stowed position.
ii
Exception.
Where physical or safety constraints prevent the deployment at some stops of a lift having its long dimension perpendicular to the vehicle axis, the transportation entity may specify a lift which is designed to deploy with its long dimension parallel to the vehicle axis and which pivots into or out of the vehicle while occupied (i.e., “rotary lift”). The requirements of
paragraph (b)(2)(i)
of this section prohibiting the lift from being stowed while occupied shall not apply to a lift design of this type if the stowed position is within the passenger compartment and the lift is intended to be stowed while occupied.
iii
Exception.
The brake or propulsion system interlocks requirement does not apply to a station platform mounted lift provided that a mechanical, electrical or other system operates to ensure that vehicles do not move when the lift is in use.
Emergency operation.
The lift shall incorporate an emergency method of deploying, lowering to ground level with a lift occupant, and raising and stowing the empty lift if the power to the lift fails. No emergency method, manual or otherwise, shall be capable of being operated in a manner that could be hazardous to the lift occupant or to the operator when operated according to manufacturer's instructions, and shall not permit the platform to be stowed or folded when occupied, unless the lift is a rotary lift intended to be stowed while occupied.
Power or equipment failure.
Lift platforms stowed in a vertical position, and deployed platforms when occupied, shall have provisions to prevent their deploying, falling, or folding any faster than 12 inches/second or their dropping of an occupant in the event of a single failure of any load carrying component.
Platform barriers.
The lift platform shall be equipped with barriers to prevent any of the wheels of a wheelchair or mobility aid from rolling off the lift during its operation. A movable barrier or inherent design feature shall prevent a wheelchair or mobility aid from rolling off the edge closest to the vehicle until the lift is in its fully raised position. Each side of the lift platform which extends beyond the vehicle in its raised position shall have a barrier a minimum 1
inches high. Such barriers shall not interfere with maneuvering into or out of the aisle. The loading-edge barrier (outer barrier) which functions as a loading ramp when the lift is at ground level, shall be sufficient when raised or closed, or a supplementary system shall be provided, to prevent a power wheelchair or mobility aid from riding over or defeating it. The outer barrier of the lift shall automatically rise or close, or a supplementary system shall automatically engage, and remain raised, closed, or engaged at all times that the lift is more than 3 inches above the station platform or roadway and the lift is occupied. Alternatively, a barrier or system may be raised, lowered, opened, closed, engaged or disengaged by the lift operator provided an interlock or inherent design feature prevents the lift from rising unless the barrier is raised or closed or the supplementary system is engaged.
Platform surface.
The lift platform surface shall be free of any protrusions over
inch high and shall be slip resistant. The lift platform shall have a minimum clear width of 28
inches at the platform, a minimum clear width of 30 inches measured from 2 inches above the lift platform surface to 30 inches above the surface, and a minimum clear length of 48 inches measured from 2 inches above the surface of the platform to 30 inches above the surface. (See Fig. 1)
Platform gaps.
Any openings between the lift platform surface and the raised barriers shall not exceed
inch wide. When the lift is at vehicle floor height with the inner barrier (if applicable) down or retracted, gaps between the forward lift platform edge and vehicle floor shall not exceed
inch horizontally and
inch vertically. Platforms on semiautomatic lifts may have a hand hold not exceeding 1
inches by 4
inches located between the edge barriers.
Platform entrance ramp.
The entrance ramp, or loading-edge barrier used as a ramp, shall not exceed a slope of 1:8 measured on level ground, for a maximum rise of 3 inches, and the transition from the station platform or roadway to ramp may be vertical without edge treatment up to
inch. Thresholds between
inch and
inch high shall be beveled with a slope no greater than 1:2.
Platform deflection.
The lift platform (not including the entrance ramp) shall not deflect more than 3 degrees (exclusive of vehicle roll) in any direction between its unloaded position and its position when loaded with 600 pounds applied through a 26 inch by 26 inch test pallet at the centroid of the lift platform.
10
Platform movement.
No part of the platform shall move at a rate exceeding 6 inches/second during lowering and lifting an occupant, and shall not exceed 12 inches/second during deploying or stowing. This requirement does not apply to the deployment or stowage cycles of lifts that are manually deployed or stowed. The maximum platform horizontal and vertical acceleration when occupied shall be 0.3g.
11
Boarding direction.
The lift shall permit both inboard and outboard facing of wheelchairs and mobility aids.
12
Use by standees.
Lifts shall accommodate persons using walkers, crutches, canes or braces or who otherwise have difficulty using steps. The lift may be marked to indicate a preferred standing position.
13
Handrails.
Platforms on lifts shall be equipped with handrails, on two sides, which move in tandem with the lift which shall be graspable and provide support to standees throughout the entire lift operation. Handrails shall have a usable component at least 8 inches long with the lowest portion a minimum 30 inches above the platform and the highest portion a maximum 38 inches above the platform. The handrails shall be capable of withstanding a force of 100 pounds concentrated at any point on the handrail without permanent deformation of the rail or its supporting structure. Handrails shall have a cross-sectional diameter between 1
inches and 1
inches or shall provide an equivalent grasping surface, and have eased edges with corner radii of not less than
inch. Handrails shall be placed to provide a minimum 1
inches knuckle clearance from the nearest adjacent surface. Handrails shall not interfere with wheelchair or mobility aid maneuverability when entering or leaving the vehicle.
Vehicle ramp or bridge plate
Design load.
Ramps or bridge plates 30 inches or longer shall support a load of 600 pounds, placed at the centroid of the ramp or bridge plate distributed over an area of 26 inches by 26 inches, with a safety factor of at least 3 based on the ultimate strength of the material. Ramps or bridge plates shorter than 30 inches shall support a load of 300 pounds.
Ramp surface.
The ramp or bridge plate surface shall be continuous and slip resistant, shall not have protrusions from the surface greater than
inch, shall have a clear width of 30 inches, and shall accommodate both four-wheel and three-wheel mobility aids.
Ramp threshold.
The transition from roadway or station platform and the transition from vehicle floor to the ramp or bridge plate may be vertical without edge treatment up to
inch. Changes in level between
inch and
inch shall be beveled with a slope no greater than 1:2.
Ramp barriers.
Each side of the ramp or bridge plate shall have barriers at least 2 inches high to prevent mobility aid wheels from slipping off.
Slope.
Ramps or bridge plates shall have the least slope practicable. If the height of the vehicle floor, under 50% passenger load, from which the ramp is deployed is 3 inches or less above the station platform a maximum slope of 1:4 is permitted; if the height of the vehicle floor, under 50% passenger load, from which the ramp is deployed is 6 inches or less, but more than 3 inches, above the station platform a maximum slope of 1:6 is permitted; if the height of the vehicle floor, under 50% passenger load, from which the ramp is deployed is 9 inches or less, but more than 6 inches, above the station platform a maximum slope of 1:8 is permitted; if the height of the vehicle floor, under 50% passenger load, from which the ramp is deployed is greater than 9 inches above the station platform a slope of 1:12 shall be achieved. Folding or telescoping ramps are permitted provided they meet all structural requirements of this section.
Attachment
Requirement.
When in use for boarding or alighting, the ramp or bridge plate shall be attached to the vehicle, or otherwise prevented from moving such that it is not subject to displacement when loading or unloading a heavy power mobility aid and that any gaps between vehicle and ramp or bridge plate, and station platform and ramp or bridge plate, shall not exceed
inch.
ii
Exception.
Ramps or bridge plates which are attached to, and deployed from, station platforms are permitted in lieu of vehicle devices provided they meet the displacement requirements of
paragraph (c)(6)(i)
of this section.
Stowage.
A compartment, securement system, or other appropriate method shall be provided to ensure that stowed ramps or bridge plates, including portable ramps or bridge plates stowed in the passenger area, do not impinge on a passenger's wheelchair or mobility aid or pose any hazard to passengers in the event of a sudden stop.
Handrails.
If provided, handrails shall allow persons with disabilities to grasp them from outside the vehicle while starting to board, and to continue to use them throughout the boarding process, and shall have the top between 30 inches and 38 inches above the ramp surface. The handrails shall be capable of withstanding a force of 100 pounds concentrated at any point on the handrail without permanent deformation of the rail or its supporting structure. The handrail shall have a cross-sectional diameter between 1
inches and 1
inches or shall provide an equivalent grasping surface, and have eased edges with corner radii of not less than
inch. Handrails shall not interfere with wheelchair or mobility aid maneuverability when entering or leaving the vehicle.
eCFR Content
Pages
Titles
Recent Changes
Corrections
Reader Aids
Using the eCFR Point-in-Time System
Understanding the eCFR
Government Policy and OFR Procedures
Developer Resources
Recent Site Updates
Information
About This Site
Legal Status
FOIA
No Fear Act
Continuity Information
My eCFR
My Subscriptions
Sign In / Sign Up