…work device that participates as either a host [ RFC1122 ][RFC6434] or router [ RFC1812 ]. This term originally referred to gateways since some very early RFCs [ RFC5 ], but is currently the common way to describe a point in a network at which messages are processed. Touch, Towns…

…age 8] RFC 6724 Default Address Selection for IPv6 September 2012 4.2.2.11 of [ RFC1812 ]), which have the prefix 127/8, are assigned link-local scope (analogously to the treatment of the IPv6 loopback address ( Section 4 of [RFC4007] )). Other IPv4 addresses (including IPv4 priv…

…terpret the quoted transport information. Note: The recommendation in RFC 1812 [RFC1812] is that IPv4 routers return a quoted packet with as much of the original datagram as possible without the length of the ICMP datagram exceeding 576 bytes. IPv6 routers include as much of the …

…ld includes the IP header plus the next eight octets of the original datagram. [RFC1812] extends the "original datagram" field to contain as many octets as possible without causing the ICMP message to exceed the minimum IPv4 reassembly buffer size (i.e., 576 octets). RFC 4443 def…

…age 8] RFC 6724 Default Address Selection for IPv6 September 2012 4.2.2.11 of [ RFC1812 ]), which have the prefix 127/8, are assigned link-local scope (analogously to the treatment of the IPv6 loopback address ( Section 4 of [RFC4007] )). Other IPv4 addresses (including IPv4 priv…

…age 8] RFC 6724 Default Address Selection for IPv6 September 2012 4.2.2.11 of [ RFC1812 ]), which have the prefix 127/8, are assigned link-local scope (analogously to the treatment of the IPv6 loopback address ( Section 4 of [RFC4007] )). Other IPv4 addresses (including IPv4 priv…

…ranslator SHOULD silently discard the packet (as discussed in Section 5.3.7 of [RFC1812] ). Note when translating ICMPv4 Error Messages into ICMPv6, the "illegal" source address will be translated for the purpose of trouble shooting. Destination Address: Mapped to an IPv6 address…

…ranslator SHOULD silently discard the packet (as discussed in Section 5.3.7 of [RFC1812] ). Note when translating ICMPv4 Error Messages into ICMPv6, the "illegal" source address will be translated for the purpose of trouble shooting. Destination Address: Mapped to an IPv6 address…

… resets all configuration parameters to their default state (RFC1122 for hosts, RFC1812 for routers) Possible values: 0 (disabled) 1 (enabled) Default: 0 (disabled) ip_default_ttl - INTEGER Default value of TTL field (Time To Live) for outgoing (but not forwarded) IP packets. Sho…

…'s smallest allowed maximum datagram size. The requirements for generating ICMP RFC1812 RFC4443 state that the quoted packet should contain as much of the original packet as possible without exceeding the minimum MTU for the IP version. The size of the quoted packet can actually …