…ear description that we could ignore other version messages completely as MLDv2 RFC3810. So make this value as default 0 is recommended. conf/interface/* changes special settings per interface (where interface” is the name of your network interface) conf/all/* is special, changes…

…icast Listener Discovery (MLD) messages specified in [RFC2710], [RFC3590], and [RFC3810] are the logical IPv6 counterparts for the IPv4 IGMP messages, all the "normal" IGMP messages are single-hop messages and SHOULD be silently dropped by the translator. Other IGMP messages migh…

… Listener Discovery "Multicast Listener Discovery Version 2 (MLDv2) for IPv6" [ RFC3810 ] SHOULD be supported as specified by the hosts and routers attached to each other via an 802.16 link. The access router that has hosts attached to it via a point-to-point link over an 802.16 …

… typically sends a Multicast Listener Discovery (MLD) report message [RFC2710] [RFC3810] for the multicast address. In the case of Duplicate Address Detection, the MLD report message is required in order to inform MLD- snooping switches, rather than routers, to forward multicast …

…pically sends a Multicast Listener Discovery (MLD) report message [ RFC2710 ] [ RFC3810 ] for the multicast address. In the case of Duplicate Address Detection, the MLD report message is required in order to inform MLD- snooping switches, rather than routers, to forward multicast…

…pically sends a Multicast Listener Discovery (MLD) report message [ RFC2710 ] [ RFC3810 ] for the multicast address. In the case of Duplicate Address Detection, the MLD report message is required in order to inform MLD- snooping switches, rather than routers, to forward multicast…

…pically sends a Multicast Listener Discovery (MLD) report message [ RFC2710 ] [ RFC3810 ] for the multicast address. In the case of Duplicate Address Detection, the MLD report message is required in order to inform MLD- snooping switches, rather than routers, to forward multicast…

… Listener Discovery (MLD) messages specified in [ RFC2710 ], [ RFC3590 ], and [ RFC3810 ] are the logical IPv6 counterparts for the IPv4 IGMP messages, all the "normal" IGMP messages are single-hop messages and SHOULD be silently dropped by the translator. Other IGMP messages mig…

… Listener Discovery (MLD) messages specified in [ RFC2710 ], [ RFC3590 ], and [ RFC3810 ] are the logical IPv6 counterparts for the IPv4 IGMP messages, all the "normal" IGMP messages are single-hop messages and SHOULD be silently dropped by the translator. Other IGMP messages mig…

…RFC) repeatedly re-confirmed in discussions that the intended interpretation of RFC3810 is that multicast receivers MUST report MLDv2 membership reports ALSO for link-local IPv6 addresses. Alas, this is still rejected by readers outside of PIM-WG, for example in current IESG revi…

…RFC) repeatedly re-confirmed in discussions that the intended interpretation of RFC3810 is that multicast receivers MUST report MLDv2 membership reports ALSO for link-local IPv6 addresses. Alas, this is still rejected by readers outside of PIM-WG, for example in current IESG revi…