… over point-to- point pseudowires (PW). This document describes extensions to [ RFC4447 ] for transporting Ethernet/802.3 and VLAN [ 802.1Q ] traffic across multiple sites that belong to the same L2 broadcast domain or VPLS. Note that the same model can be applied to other 802.1 …
…Wildcard FEC Element must be individually defined for each type of FEC Element. RFC4447 ] defines the "PWid FEC Element" and "Generalized PWid FEC Element", but does not specify the Typed Wildcard format for these elements. This document specifies the format of the Typed Wildcard…
…----------- ----- ---------------------- --------- 0x00000024 0 Illegal C-Bit [ RFC4447 0x00000025 0 Wrong C-Bit [ RFC4447 0x00000026 0 Incompatible bit-rate [ RFC4447 0x00000027 0 CEP-TDM mis-configuration [ RFC4447 0x00000028 0 PW Status [ RFC4447 0x00000029 0 Unassigned/Unreco…
…DP [ RFC3479 ], multicast extensions [ MLDP ], signaling for Layer 2 circuits [ RFC4447 ], a method for learning labels advertised by next-next-hop routers in support of fast reroute node protection NNHOP ], upstream label allocation [ UPSTREAM_LDP ], and extensions for signaling…
…ix and Wildcard), and other documents specify additional FEC types; e.g., see [ RFC4447 ] and MLDP ]. As specified by RFC 5036 , the Wildcard FEC Element refers to all FECs relative to an optional constraint. The only constraint RFC 5036 specifies is one that limits the scope of …
… VPLS) to identify an emulated LAN segment. Note that the VCID as specified in [RFC4447] is a service identifier, identifying a service emulating a point-to-point virtual circuit. In a VPLS, the VCID is a single service identifier, so it has global significance across all PEs inv…
… VPLS) to identify an emulated LAN segment. Note that the VCID as specified in [RFC4447] is a service identifier, identifying a service emulating a point-to-point virtual circuit. In a VPLS, the VCID is a single service identifier, so it has global significance across all PEs inv…