…ection 6 also provides recommendations for SCTP endpoints, updating [RFC4960], [RFC6951], and [RFC8261] to use the method specified in this document instead of the method in [RFC4821]. 2. Terminology The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "S…
… packet format is used on the wire. Please note that the procedures defined in [RFC6951] for dealing with the UDP port numbers do not apply here. When using the encapsulation defined in this document, SCTP is unaware about the protocols used below DTLS. 2. Conventions The key wor…
…packet format is used on the wire. Please note that the procedures defined in [ RFC6951 ] for dealing with the UDP port numbers do not apply here. When using the encapsulation defined in this document, SCTP is unaware about the protocols used below DTLS. 2 . Conventions The key w…
…packet format is used on the wire. Please note that the procedures defined in [ RFC6951 ] for dealing with the UDP port numbers do not apply here. When using the encapsulation defined in this document, SCTP is unaware about the protocols used below DTLS. 2 . Conventions The key w…
… contrast to DTLS over SCTP [ RFC6083 ] and in combination with SCTP over UDP [ RFC6951 ] ) has been chosen for the following reasons: ¶ supports the transmission of arbitrarily large user messages; ¶ shares the DTLS connection with the SRTP media channels of the PeerConnection; …
… contrast to DTLS over SCTP [ RFC6083 ] and in combination with SCTP over UDP [ RFC6951 ] ) has been chosen for the following reasons: ¶ supports the transmission of arbitrarily large user messages; ¶ shares the DTLS connection with the SRTP media channels of the PeerConnection; …
…lly in contrast to DTLS over SCTP RFC6083 and in combination with SCTP over UDP RFC6951 has been chosen for the following reasons: supports the transmission of arbitrarily large user messages; shares the DTLS connection with the SRTP media channels of the PeerConnection; and prov…
…DP sock is used for processing the incoming UDP-encapsulated SCTP packets (from RFC6951), and shared by all applications in the same net namespace. This UDP sock will be closed when the value is set to 0. The value will also be used to set the src port of the UDP header for the o…