Virtual Archaeology Museum | Bureau of Ocean Energy Management

Virtual Archaeology Museum | Bureau of Ocean Energy Management
Official websites use .gov
.gov
website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
lock
) or
means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
Hero Image
Virtual Archaeology Museum
Deep Discoveries
In the course of oil and gas exploration, BOEM has discovered many amazing shipwrecks. Each shipwreck tells a story of our shared history and provides a mystery to uncover. BOEM would like to share these mysteries with you by providing access to new 3D modeling never before possible using video publicly available from
NOAA's Office of Ocean Exploration and Research
Please visit our series of short videos about important shipwreck sites.
Read more Gulf Of America Archaeological Information
Featured Shipwrecks
15563 Shipwreck
Shipwreck 15563 likely dates to the first half of the 19th century. The evidence suggests this was a two masted schooner or a brig. It was most likely a cargo vessel of some sort that now rests in 6,000 feet (1829 meters) in the Gulf. The site's most prominent feature is its stove that features the name G&W Ashbridge.
3D Model
Video
Mosaic Map
15377 Shipwreck
With its wooden hull sheathed in copper sheets as protection against marine organisms and three towering masts carrying full sail, this large 100-foot long ship would have been a magnificent sight before it met its tragic end sometime around the middle of the 19th century in the Gulf.
3D Model
Video
Mosaic Map
Monterrey C Shipwreck
The largest of the three “Monterrey” shipwrecks that sank near each other. These wrecks lay almost 200 miles from land and maybe sank during the same storm. Monterrey C was by far the most damaged from hitting the seafloor and came to rest in over 4,000 feet of seawater.
3D Model
Video
Mosaic Map
Monterrey A Shipwreck
The wreck of a wooden-hulled and copper-sheathed sailing ship that sank in over 4,000 feet of water some 200 years ago. The vessel carries at least 5 cannon and crates of muskets. Its mission remains a mystery. Was this a pirate, a privateer, a military ship, or a heavily defended merchant?
3D Model
Video
Mosaic Map
Blake Ridge Shipwreck
Located over 130 miles off the coast of North Carolina in over 7,000 feet of water, the “Blake Ridge Wreck," whose real name remains a mystery, was likely a fishing vessel caught at sea in a storm in the early part of the early 19th century.
3D Model
Video
Mosaic Map
Monterrey B Shipwreck
Monterrey B sank carrying a cargo of hides and large, white blocks of something we can’t identify. They could be tallow (fat from cattle) used for making candles, a tree sap called copal used in varnish, or even natural rubber. What else could they be? Pottery on the ship hints that the ship may have come from Mexico.
3D Model
Video
Mosaic Map
15563 Shipwreck 3D Model
This is the first model of the high-resolution photogrammetry passes from Deep Discoverer (D2) remotely operated vehicle (ROV) on the Research Vessel Okeanos Explorer. These data were from NOAA Cruise EX2201 Dive 02. Much credit goes to the skillful ROV pilots on the Okeanos. Protocols for data collection and processing by BOEM’s Marine Archaeologist Scott Sorset.
Stove
A cast iron stove with two large kettles used to render whale blubber into oil.
Broken Anchor
This is a solid iron anchor snapped in two by wrecking.
Stern or back of the ship
The stern of the vessel where navigational instruments, wine bottles, and another anchor were found.
Eroded Ship Frames
These are tiny fragments of the hull of the ship exposed to the seabed. This gives a hint to what lies just beneath the surface.
Hawsepipe
Lead pipes to prevent the anchor line from chafing or damaging the hull. You can make out the end of one just peeking out from the sand at the bow of the ship.
Cask
This is what we suspect to be a small barrel or cask that would have been used to store liquids.
Featured Shipwrecks
Shipwreck 15377 3D Model
This is the first model of the high-resolution photogrammetry passes from Deep Discoverer (D2) on Okeanos Explorer EX1711 Dive 07. Much credit goes to the skillful Remotely Operated Vehicle (ROV) pilots on the Okeanos Explorer. Protocols for data collection and processing by BOEM's Marine Archaeologist Scott Sorset.
Shipwreck 15377
Early indications are that the hull construction and artifacts date between the 1830s and 1840s. It was a full-rigged, three-masted vessel approximately 100 feet in length. It was heavily built and likely a merchant vessel designed for transporting bulk cargo and not for speed.
Lead Draft Markings
Draft marks indicate the distance from the bottom of the hull to the waterline. You can see the number 13 clearly and part of the number 12, indicating much of the site is buried under 12 feet of sediment.
Ship's Stove
The holes visible here may have been used to set cooking pots to warm food and drink without them falling out in rough seas.
Pumps
These large bits of machinery are part of the ship’s bilge pump system.
Anchor
A sheet anchor was often stored in reserve in case of emergency. Typically, these are found in the middle of the ship.
Chain Plates
Chain plates attached the standing rigging from the mast to the side of the hull. Their placement found along the hull indicates this was a full-rigged ship. Early indications suggest this was either a three-masted vessel.
Anchor Fluke
The flat end of the arm of an anchor protruding from the sand. This anchor was likely slung, or “catted,” from the side of the ship while it was underway.
Organic Staining
This vessel has extensive organic staining within the hull. This may indicate the hull contained bulk cargos of commodities like cotton, rice, sugar, tobacco, etc.
Drift Pins
Long bolts that holds outer-hull planking to the ribs of the ship. Typically made of copper in this time period.
10
Hawse Pipes
Lead pipes to prevent the anchor line from chafing or damaging the hull.
Featured Shipwrecks
Monterrey B Shipwreck 3D Model
This is the model of the Monterrey B Shipwreck Version 1.0. Data processing and design by BOEM's Marine Archaeologist Scott Sorset.
More information on this shipwreck can be found on Ocean Exploration and Research's website.
Unknown Substance
Mystery items that were once contained within boxes that are now dissolved away. Some hypotheses include tallow, rubber, and wax.
Hides
These were hides rolled into bundles for transport aboard ship.
Stove
This was the ship’s stove.
Crate
This was possibly an insert to place into a box for transporting case bottles. These bottles often contained gin.”
Demijohn Wine Jugs
The bow of the ship contained numerous liquor, wine, and beer bottles, including large, glass demijohns that likely transported locally produced mezcal or wine.
Featured Shipwrecks
Monterrey C Shipwreck 3D Model
This is an experimental modeling technique used for the Monterrey C Shipwreck. This is colorized version 1.0. Much credit goes to the skillful ROV pilots on the Okeanos Explorer. Data processing and design by the BOEM’s Marine Archaeologist Scott Sorset.
More information on this shipwreck can be found at oceanexplorer.noaa.gov
Anchor
This very large anchor was secured by a heavy rope attached to the ring at its top.
Copper Sheathing
Copper sheathing, poisonous to most marine organisms, was used to prevent shipworms from consuming the wooden hull.
Ballast
Ballast stones were used to properly balance the weight of a vessel when underway. Their presence at the aft end of the wreck indicates that the vessel struck the seafloor hard on its stern.
Glass Bottles
Many liquor bottles are located in the stern of the vessel. They would have contained wine, beer, gin, and other alcoholic beverages. Alcohol is common on open-ocean vessels as it does not foul as can water. These bottles are often found in the stern as they would have been under the control of the vessel’s officers whose quarters were located in this area.
Lead Depth Sounder
Sailors would use a line and lead weight to determine the water depth when navigating in poorly charted areas.
Bow Anchor Fluke
The fluke of the mostly buried bow anchor at this location indicates that it was secured in place at the time of sinking.
Hawsepipes
Anchor ropes were threaded through lead hawsepipes so that friction from the rope would not damage the wooden hull.
Rudder
The vessel’s large rudder, used to steer the vessel through the water, was badly damaged upon impact with the seafloor.
Featured Shipwrecks
Monterrey A Shipwreck 3D Model
This is the photogrammetry model of Monterrey A Shipwreck Ver 1.0. Data processing and design by BOEM's Marine Archaeologist Scott Sorset. Read more information about this wreck on BOEM's website.
Ship's Stove
The ship’s stove was where food was prepared. Cooking was frequently done on deck to prevent fire.
Demijohn Wine Jug
Jugs like these often carried wine, mezcal, and other spirits.
Anchor
This was likely a “bower anchor,” one of the main anchors of the ship. The extra large iron ring would have been wrapped in rope and canvas to prevent the anchor rope from chafing. During this period, anchors were not attached to the ship with chains as they are today.
Case of Muskets
Examples of two different types of British military, as well as European or American-made flintlock muskets, have been tentatively identified.
Block and Tackle
A ‘ throat halyard.’ Attached near the top of a mast, it is used to raise and lower the ‘yard’ and sail. Technically they are used on fore-and-aft rigged sailing vessels.
Stem Post
The Stem Post is visible here. This is the front most portion of the ship. In the images linked below you can view the lead-draft makings in roman numerals.
Gun Carriage Wheel
Wheel from the gun carriage. The wheel was usually found to be associated with a pivot-gun.
Ship's Cannon
Called "guns" when aboard ships, this vessel appears to have been carrying at least 5 cannons of various sizes.
Copper Sheathing
The ship was clad in copper to keep the infamous
Teredo navalis
or “shipworm” from eating the wooden hull.
10
Cantaro
A type of water jug common to the Yucatan Peninsula.
Featured Shipwrecks
Blake Ridge Shipwreck
This is the second model (Version 2.1) of the high-resolution photogrammetry passes from Deep Discoverer (D2) on Okeanos Explorer EX1806 Dive 09. Much credit goes to the skillful ROV pilots on the Okeanos Explorer. Protocols for data collection and processing by BOEM’s Marine Archaeologist Scott Sorset.
Octant
An octant is a portable navigational instrument used by sailors to determine their latitude at sea by observing the altitude of the sun or stars above the horizon.
Anchor Chain
The anchor chain extended an unknown distance away from the wreck but the expedition was unable to explore the other end of it.
Brick Pile
This pile of bricks may have been used as a fire-proof surface on the deck of the ship on which to cook or for rendering the ship’s unknown cargo.
Rudder Gudgeon
The ship’s rudder mounts to the stern of the ship with a hinge made of brass to allow it to move. Part of that hinge, called the “grudgeon,” mounts to the sternpost and has a hole in it to receive a pin, called the "pintle," from the piece on the rudder itself. This rudder was badly damaged upon impact with the seafloor.
Conch Shells
This cargo is a big clue as to possible ports in the Caribbean this ship had visited prior to sinking.
Chain Plates
Chain plates attached the standing rigging from the mast to the side of the hull. These were found just outside the hull of the wreckage.
Ballast Stones
These stones were used to keep the sailing ship upright and allowed the crew to shift weight as needed as they took on their cargo.
Wooden Frames
It is remarkable that after 200 years there is still wooden structure remaining. Understanding the spacing between the ribs of the ship helps us to understand the approximate size of the ship.
Stoneware Jug
Jugs like these were used time and again for many different liquids. In fact, they are so sturdy that many times the jugs can far pre-date the ship itself.
10
Bow
These structural timbers form the bow of the vessel.
Featured Shipwrecks